Floor hangers (including racks) for clothes, suits, shirts, trousers

One of the most convenient ways to store clothes is a floor hanger. You can put it at the entrance and leave your outerwear here. Other models are more suitable for bedrooms, dressing rooms, children's rooms.

Types of floor hangers and their location

By design, floor hangers can be divided into several categories:

• for outerwear;
  

  These standing hangers are most often seen near doors.

• racks for hanging hangers;
• suit, for shirts, trousers;
• hangers-chairs.

Some types of floor hangers are placed in certain rooms. For example, coat hangers are placed in the hallway near the door. It's convenient: you can immediately get rid of your clothes. The floor hanger rack is more versatile. Such products can be placed in the corridor, in the dressing room, even in the nursery or bedroom. They hold a large amount of clothes and can be used to replace a wardrobe.

Rack hangers are great in bedrooms and dressing rooms or in those rooms that replace them.

Standing hangers for suits, shirts and trousers are most often "registered" in bedrooms or nurseries (if the child is a schoolboy). This is where we usually dress before leaving the house. There are also hangers-chairs. This is, in fact, one of the options for costume hangers. It's just that the legs and stops have taken the shape of a seat.

What materials are they made of

The floor hanger is most often made of metal or wood. Both of these materials are strong, flexible, durable and relatively inexpensive. Some parts - plugs, hook parts - can be made of plastic.

Most often you can see floor hangers made of metal and wood.

Plastic inserts are more commonly found on lower cost metal hangers. If the elements of the supporting structure are not made of plastic, this is not bad and you can buy such floor hangers without hesitation. If the elements of the supporting structure are made of plastic, it is better to look for another model.

Metal hangers

The largest selection of metal floor hangers. They are usually made from thin-walled pipes of round or square cross-section. The metal is used most often black, covered with a protective coating. It can be paint (most often - powder spraying), nickel plating, chrome plating. In recent years, a new protective coating has appeared - a plastic film (PVA). This is also a good option, since the film is impervious to moisture and air. It is easy to care for such products, as the surface is smooth, without pores.

Several models of metal floor hangers

If the floor hanger will be used to accommodate heavy winter clothing, pay attention to the thickness of the metal when choosing. The minimum in this case is 1 mm. If the pipe wall thickness is not specified in the product description, most likely the wall is very thin and suitable for light clothing. Indirect signs that will confirm your guesses are the weight of the product and the price.

Wooden

Wooden hangers can be carved from solid wood, or they can be prefabricated. The first option is much more expensive. Prefabricated teams are 2-3 times cheaper, but not too different in appearance. The presence of joints in products of normal quality is hardly noticeable, so that with a limited budget it is quite possible to purchase economy class products.

Wooden floor hangers are of different types

Wooden floor hangers are well sanded and covered with a protective coating. Usually varnish or oil is used.The varnish creates a protective film on the surface so that it is easy to care for such products. Oils for wood do not create a protective film, but they protect no worse. When processing with oil, the structure of the wood is clearly visible - all the fibers, the pattern.

Standing clothes hangers in the hallway

Floor hangers for outerwear in the hallway are most often a rod on which hooks for clothes of different lengths and shapes are attached at different heights. For stability, the structure is equipped with a round (rarely square) weighted base. They can be made of wood or metal.

The height of the floor stand is 150 cm and higher, and the base is a circle with a diameter of 35-45 cm. In order for the hanger to be stable, you need to pay attention to the fact that the lower part is weighted. And all the same, such designs require careful attention: clothes should be hung evenly. Otherwise, the hanger may fall.

Clothes hanger floor in the hallway: the most popular models

There are floor hangers for this type of outerwear, but made in a different way. Several pipes or metal strips are bent to a certain radius. Moreover, the upper part is smaller than the lower one. This design is more stable, but requires more space, which is not always possible in a small hallway.

Clothes hanger racks

A hanger-rack for clothes on hangers is a handy thing if there is not enough space in the closets. They consist of a rectangular base, one or two cross-beams, on which hangers with clothes are hung.

A floor hanger for clothes on a hanger is also called a rack hanger

Rack hangers are made of metal and wood. There are metal pipes, there are forged ones. Some models of metal clothes racks have adjustable height. For long clothes, the rack can be raised higher. The maximum height is 150 cm. For short clothes, it can be placed at a height of 80-90 cm. This is the minimum height, but there are also intermediate positions.

Several types of racks for clothes on trempels

In some cases, a floor hanger on wheels is useful. It is easy to move it from place to place without removing hanging clothes. There are children's models of this type of floor hangers. They differ only in height and more "fun" colors. Also, children's floor hangers can be made of plastic. Children's clothing doesn't weigh that much, so the strength of the plastic is more than enough. And for the price, plastic floor hangers are the cheapest.

Folding models - exit in case of receiving guests

For those who receive guests in large numbers, it can be problematic to place their outerwear. For such cases, there is a foldable coat hanger rack. When folded, it takes up very little space and can be stored in the closet.

Floor hanger for suit

The problem of storing a business suit can be easily solved with the purchase of a special floor hanger. It is somewhat similar to racks, only with special shoulders for a jacket and a crossbar for trousers.

Floor hanger for suit storage

There are suit racks made of wood, metal and plastic. Plastic in this case is not bad: the load is not expected to be large, so the strength of modern plastics is more than enough.

If we talk about useful options, this is a shelf or a box. It is convenient to store business trifles in it: glasses, cufflinks, wallet, car keys, etc.

Different models of standing suit hangers

They usually put floor hangers for a suit in the bedroom, in the dressing room. It can be convenient to have a similar device in your office. There are different models, you can choose for any interior style. And some options themselves look like designer jewelry.

Chair hanger and bedside hanger

There are some rather unusual models of hangers. They are combined with pieces of furniture. For example, there is a hanger-chair.The models are different: with a hanger for a suit, just a barbell for a hanger or with a rack for outerwear. This is a very good option for small apartments. It takes up as much space as a regular chair or bench, and also serves to store clothes.

Floor hanger with chair and bedside table - for full use of the hallway space

Another option: a bedside table with a hanger. The bottom of this floor hanger is much heavier than the top half, so it won't tip over from a pair of hanging coats. The second plus of such furniture is the optimal use of space. The trouble with all floor hangers is that the bottom 50-60 cm remain unused. This is not the case with the nightstand hanger. This is another good way to use space efficiently for small hallways.